Osmio EZFITPRO-100 Undersink Water Filter Kit 15mm Push Fit
The Osmio EZFITPRO-100 Undersink Water Filter Kit is a simple and effective compact Water Filter unit with 15mm Push Fittings for easy connection to copper or plastic 15mm pipe.
✔ Keep your existing kitchen tap and filter all the cold water
✔ No need for an additional tap or any installation fittings
✔ Removes chlorine taste and odour
If you are looking for the perfect simple, cost effective, efficient and high performance reliable NSF Certified quality water filtration housing solution without the need for a separate tap or a 3 way tap or a self-piercing saddle valve and any other installation parts, then this is the perfect kit for you!
If you are looking for the same kit for a 3 way tap click here. If you want this kit with a stand alone tap, click here.
The Osmio EZFITPRO-100 uses a top of the range NSF/WRAS certified carbon block water filter, water filter housing, plus WRAS (NSF) certified 15mm push fittings for a easy and simple quick connect to 15mm pipe (either copper or plastic speed fit pipe).
How it works - Inline Water Filter 15mm
The Osmio filter housings with buttress threads for 9-3/4 in. filter cartridges are made from NSF and FDA grade materials, manufactured from the highest quality, FDA grade, 100% polypropylene and acrylic styrene. They have a leak-proof sealing is accomplished by compression against a top seated EPDM o-ring located in the housing’s sump. Thick wall and added ribs make the housings ideal for a wide range of applications. Polypropylene construction provides excellent chemical resistance with most acids, alcohol, ammonia, oils, plating solutions and many aggressive chemicals.
Dimensions
The Osmio EZFITPRO-100 Inline 15mm push fit water filter system has the following dimensions:
A: 325 mm
B: 122 mm
C: 107 mm
5 Micron Carbon Block
The Osmio Carbon Block filters use coconut carbon filtration technology to maximize the carbon capacity and prevent channelling whilst maintaining a low pressure drop leading to more efficient water filtration.
The filter is a compatible replacement water filter cartridge for similar 10" filter housings including brands such as Pentek, Ametek, Culligan, Whirlpool and so on. It will fit all under sink water filter housings which use a standard size small 10" x 2.5" filter replacement cartridge.
NSF Certified Carbon Filter Specifications:
Construction Notes
1. Outer polypropylene wrap extends the life of the block by preventing premature plugging.
2. Carbon block extruded from acid washed bituminous activated carbon.
Materials of Construction
Carbon Type: Acid Washed Bituminous
End Cap: Polypropylene
Gasket: Silicone (EPDM/Buna-N)
Core: Polypropylene wrap
Netting: Polyethylene
Technical Data
Micron Ratings (μ) 5
Lengths (") 9¾
Maximum Operating Temperature (°C) 82
Maximum Operating Pressure (bar) 4
Chlorine Reduction (L)
Standard Diameter 9¾" - 6,000 L
Length (nominal mm) 248
Outside Diameter (nominal mm) 65
Inside Diameter (nominal mm) 28
Additional Information
Model | Osmio EZFITPRO Undersink Water Filter Kit 15mm Push Fit |
---|---|
SKU | EZFITPRO-100 |
Brand | OSMIO |
In Depth | Product ID: Osmio EZFITPRO Undersink Water Filter Kit 15mm Push Fit Specification: Recommended Flow Rate for optimum chlorine removal: 4 litres per minute Maximum operating pressure for filter: 125 PSIG Housing is rated for temperatures to 125°F (52°C) and pressures to 125 psid (8.75 bar). Filter operating temperature: 50° F to 125° F - 10° C to 52° C Up to 99% chlorine reduction - Performance tested @ flow with 2ppm chlorine. The Full Kit contains the following: 1 x Osmio 2.5 x 10 Inch Activated Coconut Shell Carbon Block Cartridge (100% Coconut Shell Carbon, NSF Certified) 1 x Osmio NSF Certified Housing White Sump; White Cap; 1/2 in. FNPT with 15mm Push Fittings (FH4200WW12) 1 x Spanner 1 x Bracket with 4 Mounting Screws |