P2.5-10
In stock
NanoCeram® 0.2 Micron Pleated Filter 2.5 x 10 Inch
£67.99
Due to their unique construction, the NanoCeram® 0.2 Micron Pleated Filter (2.5 x 10 Inch), with their very high surface area offer:
- Very high flow rates
- Very low pressure loss
- Very high dirt holding capacity
- 5 log reduction for cysts
- 5 log reduction for pathogenic bacteria”
Each NanoCeram® pleated filter cartridge is designed to satisfy the most difficult requirements in water treatment. By using the scientific principal of electropositive attraction/capture, NanoCeram® technology leads to a rapid and highly efficient adsorption of virtually all particle sizes.
NanoCeram®’s media has a high capacity for particles as large astens of microns or as small as a few nanometers. Each NanoCeram® Filter Cartridge exhibits a rating of 0.2μ . . . a rating typically associated with ultraporous membranes. Yet NanoCeram® flow rates are hundreds of times greater than such membranes.
Additional Information
| Model | NanoCeram® 0.2 Micron Pleated Filter 2.5 x 10 Inch |
|---|---|
| SKU | NanoCeram® 0.2 Micron Pleated Filter 2.5 x 10 Inch |
| Brand | Watts |
| In Depth | Pre-filtration: Required Housing Size Required: 2.5" x 10" Cartridge Size: 2.5" x 9.75" Capacity: 20,000 litres Material: Nanofibre Pressure: 75-100 psi Life Span: Average 12 months Max Flow: 100 Litres p/m Water pH: 4.5 to 9.0 Water Temp: 4-470 Celsius Dry Weight: 0.5 Kg Principal applications: POE (point of entry, residential use) Thermally bonded blend of micro-glass fibres & cellulose infused with nano-alumina fibres in a non-woven matrix creates an electro-positively charged depth filter media. When assembled into a pleated cartridge, NanoCeram® offers a unique combination of efficiency, capacity, flow rate & low pressure drop at levels unmatched in today’s filtration marketplace. • Silt Density Index (SDI): ≤ 0.5 • Turbidity Reduction: < 0.01 NTU until Terminal ΔP (40psi) • Low ΔP: < 1.5psi @ 4gpm (Part No. P2.5-10) • Efficiency: 99.9% reduction of 0.2μ particulate (monodispersed latex spheres) • Flow Rate: 5mL/cm2/min @ 4gpm (Part No. P2.5-10) • Dirt Holding Capacity (DHC): 572 mg/in2 (A2 Fine Test Dust) • Cyst Retention: > 5 LRV • Bacteria (Klebsiella terrigena): > 5 LRV • Temperature Range: 39 - 135° F (4 - 57°C) • Maximum Pressure: 70 psi (4.83 bar) • Effective pH Range: 5 - 10 |
Write Your Own Review