Call us: 020 3290 9960

PurePro 50GPD Reverse Osmosis Membrane
PurePro 50GPD Reverse Osmosis Membrane
PurePro 50GPD Reverse Osmosis Membrane
PurePro 50GPD Reverse Osmosis Membrane

PurePro 50GPD TFC Reverse Osmosis Membrane

£36.99
Product in stock
Manufacturer : PurePro

Description

Replacement Pure-Pro RO Membrane - suitable for the Pure-Pro ERS-106A Alkaline RO System

PurePro reverse osmosis membrane elements for home drinking water are the industry's most reliable. Advanced membrane technology and automated fabrication allow these elements to deliver consistent performance that equipment suppliers, water treatment dealers and residential customers can rely on. A thin film composite (TFC) high quality membrane that processes 50 gallons per day. It remove the following hard water contaminants that may be present in your water: lead, cooper, barium, chromium, mercury, sodium, cadmium, fluoride, nitrite, nitrate, and selenium.

PurePro home drinking water elements are rated at 50 psi and will purify about 20% more water than competitive elements rated at 60 psi (please see reference charts on back for more information).NSFCOMPONENTThis Membrane Element is Tested and Certified by NSF International against NSF/ANSI Standard 58 for material requirements only.Estimated Percent Rejection of Various Solutes by PUREPRO Membranes NSF Certified Made In USA High Stable Performance HIGHER QUALITY LOW PRICE

Applied pressure Psig(bar) - 80 (5.4)

Permeate Flow Rate, gpd(l/h) - 50 (7.9)

Stabilized Salt Rejection(%) - 98

1.Permeate flow and salt rejection based on the following test conditions: 250 ppm softened tapwater, 77 F(25 C)

2.Minimum salt rejection is 96.0%.

3.Permeate flows for individual elements may vary +/-20%., 15% recovery and the specified applied pressure


Operating Limits

  • Membrane Type: Polyamide Thin-Film Composite
  • Maximum Operating Temperature: 113 F (45 C)
  • Maximum Operating Pressure: 300 psig (21 bar)
  • Maximum Feed Flow Rate: 2.0 gpm (7.6 lpm)
  • pH Range, Continuous Operation: 2-11
  • pH Range, Short-Term Cleaning (30 min.):1-12
  • Maximum Feed Silt Density Index (SDI): SDI 5c
  • Free Chlorine Tolerance:

Estimated Percent Rejection of Various Solutes by PUREPRO Membranes

TDS rejection ( 98%average TDS rejection ).

In order to assist customers in estimating the rejection of PUREPRO FT30 membranes, tests have been performed with a variety of solute compounds. The results of these tests are indicated as a % rejection for each compound listed in the tables below.

Actual system performance may vary from the listed data, particularly with changes in feedwater concentration, pH, and temperature.

For this reason, these tables should be used as a quick screen. Pilot trials should be performed to determine actual rejection in a specific application.

Download the Pure-Pro ERS-106A Reverse Osmosis System User Manual

Download the Pure-Pro RO System User Manual ERS-106A

The diagram below shows how it all fits together.

Additional Information

Model Pure-Pro 50GPD TFC Reverse Osmosis Membrane
SKU TW30-1812-50
Brand Pure-Pro
In Depth Pure-Pro membranes are made in U.S.A . This Membrane Element is Tested and Certified by NSF International against NSF/ANSI Standard 58 for
material requirements only.

Estimated Percent Rejection of Various Solutes by PUREPRO Membranes

TDS rejection ( 98%average TDS rejection ) .

General Information:

1.The first full tank of permeate should be discarded. Do not use this initial permeate for drinking water or food preparation.

2.Keep elements moist at all times after initial wetting.

3.If operating limits and guidelines given in this bulletin are not strictly followed, the limited warranty will be null and void.

4.To prevent biological growth during prolonged system shutdowns, it is recommended that membrane elements be immersed in a preservative solution.

5.The membrane shows some resistance to short-term attack by chlorine (hypochlorite). Continuous exposure, however, may damage the membrane and should be avoided.

6.The customer is fully responsible for the effects of incompatible chemicals and lubricants on elements. Their use will void the element limited warranty.

Copyright © 2013-2017 - Webshop Central Ltd. All rights reserved.
Registered office: 171 Kingston Road, Teddington, England, TW11 9JP
Registered Company No. 8503874
VAT number: 252 6182 14