Osmio Sienna Chrome 3-Way Tap Ultra-Soft Filter Kit
The Osmio Sienna Premium 3-Way (Tri-flow) Kitchen Tap makes a beautiful addition to any stylish kitchen. Traditional with a modern finish, the Osmio Sienna Premium 3-Way (Tri-flow) Kitchen Tap has side mounted handles delivering the ultimate in filtration and design. The side-mounted handles have hot and cold being operated from the lever on one side and the lever on the other side controlling the filtered water. Usually the left hand side is used for filtered water and the right hand side for hot and cold; however it can be installed to be the other way around.
This tap is the finest in our range and highly recommended for those seeking nothing but the very best.
Dimensions & Technical Drawing
How the taps levers work
The advantage of a 2 lever 3 way tap system is that you have a single lever for hot and hot, meaning you can very quickly get to the right temperature without having to use two separate levers. The left hand lever is then dedicated to providing the filters or unfiltered hard water which makes it easier for people in your household to remember. See the diagram below:
Money Back Guarantee & 3 Year Warranty
All the Osmio 3 Way Taps come with our extended 3 year warranty and we also stock replacement parts and valves to ensure your tap will be in good working order. We often get asked by customers whether they can see it in person before buying, which we cannot do as we are an internet based retailer. For this reason we can offer the best prices but also a no quibble guarantee, so if you want to return the product to us for whatever reason you will receive a full refund.
✔ Granular Activated Carbon (GAC) – for chlorine, taste and odour reduction
✔ Phosphate – for scale inhibition
✔ De-alk resin – for temporary hardness and heavy metal reduction
The Watts 2.5 x 10 GAC/Phosphate & De-Alk Filter incorporates granular activated carbon (GAC) which is combined with Phosphate and De-alk resin. The filter is effective against chlorine, taste and odour, heavy metals e.g. lead, and will also tackle hard water, which is seen as limescale in kettles and as an unsightly scum on the surface of hot drinks. Water hardness varies greatly depending upon location, so the filter will need to be replaced at 3 - 6 monthly intervals or longer all of which entirely depends on the hardness of your water and the amount you use.
We recommend your flow rate not exceed 4 LPM for the best contact time and filtration.
||Osmio Sienna Chrome 3-Way Tap Ultra-Soft Filter Kit
||Supplied with fixing accessories and 3 flexible hoses (3/8" or 1/2").
This stylish and functional kitchen tap will be compatible with any of our drinking water filter systems. We highly recommend you get this system with our Spectrum Quick Change Reverse Osmosis System for the very best combination of style, design and the most superior level of filtration.
We have a great selection of Three Way taps, also known as TriFlo or Triflow taps. These are effectively a single kitchen tap for your hot and cold water and in addition your filtered and purified water. All of our drinking water filters come with a standard faucet tap which is fitted in addition to the kitchen sink tap. These 3 way taps remove the need for this, providing one single and stylish solution.
The Osmio Sienna has 3 separate tubes going into the tap so the filtered water does not mix with the hot/cold feed. Slight vertical movement between the spout and base to prevent early seizing up and stiffness of the spout over time
Water Pressure & Flow Chart
This tap will produce the following flow rates according to the incoming pressure on both hot and cold:
0.5 bar - 1.2L/M/0.5 bar - 1.2L/M
1.0 bar - 1.8L/M/1.0 bar - 2.6L/M
1.5 bar - 5.6L/M/1.5 bar - 4.8L/M
2.0 bar - 8.0L/M/2.0 bar - 8.6L/M
2.5 bar - 9.2L/M/2.5 bar - 9.2L/M
It is therefore recommended that this tap only be used on a pressurized hot water system. It may be used on a gravity fed hot water system provided the incoming pressure produces a flow rate that is acceptable to you, or if the gravity fed hot water system is pumped and pressurized.
Tap base hole size: 35 mm