The Osmio Sienna Premium 3-Way (Tri-flow) Kitchen Tap makes a beautiful addition to any stylish kitchen. Traditional with a modern finish, the Osmio Sienna Premium 3-Way (Tri-flow) Kitchen Tap has side mounted handles delivering the ultimate in filtration and design. The side-mounted handles have hot and cold being operated from the lever on one side and the lever on the other side controlling the filtered water. Usually the left hand side is used for filtered water and the right hand side for hot and cold; however it can be installed to be the other way around.
This tap is the finest in our range and highly recommended for those seeking nothing but the very best.
Looking for a different design? Browse Some Other 3 Way Tap Styles
The advantage of a 2 lever 3 way tap system is that you have a single lever for hot and hot, meaning you can very quickly get to the right temperature without having to use two separate levers. The left hand lever is then dedicated to providing the filters or unfiltered hard water which makes it easier for people in your household to remember. See the diagram below:
All the Osmio 3 Way Taps come with our extended 5 year warranty on the valves and 1 year warranty on the finish and we also stock replacement parts and valves to ensure your tap will be in good working order. We often get asked by customers whether they can see it in person before buying, which we cannot do as we are an internet based retailer. For this reason we can offer the best prices but also a no quibble guarantee, so if you want to return the product to us for whatever reason you will receive a full refund.
The WRAS approved Spectrum Carbon Block filters use coconut carbon filtration technology to maximize the carbon capacity and prevent channelling whilst maintaining a low pressure drop leading to more efficient water filtration.
Spectrum 10" Carbon Filter Specifications:
1. Outer polypropylene wrap extends the life of the block by preventing premature plugging.
2. Carbon block extruded from acid washed bituminous activated carbon.
Materials of Construction
Carbon Type: Acid Washed Bituminous
End Cap: Polypropylene
Gasket: Silicone (EPDM/Buna-N)
Core: Polypropylene wrap
Micron Ratings (μ) 5
Lengths (") 9¾
Maximum Operating Temperature (°C) 82
Maximum Operating Pressure (bar) 17
Chlorine Reduction (L)
Standard Diameter 9¾" - 6,000 L
Length (nominal mm) 248
Outside Diameter (nominal mm) 65
Inside Diameter (nominal mm) 28
|Model||Osmio Sienna Chrome 3-Way Tap Ultra-Pure Filter Kit|
|In Depth||Supplied with fixing accessories and 3 flexible hoses (3/8" or 1/2").
This stylish and functional kitchen tap will be compatible with any of our drinking water filter systems. We highly recommend you get this system with our Spectrum Quick Change Reverse Osmosis System for the very best combination of style, design and the most superior level of filtration.
We have a great selection of Three Way taps, also known as TriFlo or Triflow taps. These are effectively a single kitchen tap for your hot and cold water and in addition your filtered and purified water. All of our drinking water filters come with a standard faucet tap which is fitted in addition to the kitchen sink tap. These 3 way taps remove the need for this, providing one single and stylish solution.
The Osmio Sienna has 3 separate tubes going into the tap so the filtered water does not mix with the hot/cold feed. Slight vertical movement between the spout and base to prevent early seizing up and stiffness of the spout over time.
Water Pressure & Flow Chart
This tap will produce the following flow rates according to the incoming pressure on both hot and cold:
0.5 bar - 1.2L/M/0.5 bar - 1.2L/M
1.0 bar - 1.8L/M/1.0 bar - 2.6L/M
1.5 bar - 5.6L/M/1.5 bar - 4.8L/M
2.0 bar - 8.0L/M/2.0 bar - 8.6L/M
2.5 bar - 9.2L/M/2.5 bar - 9.2L/M
It is therefore recommended that this tap only be used on a pressurized hot water system. It may be used on a gravity fed hot water system provided the incoming pressure produces a flow rate that is acceptable to you, or if the gravity fed hot water system is pumped and pressurized.
Tap base hole size: 35 mm
Warranty: 5 year long warranty on the valves and 1 year on the finish