Osmio HT+ Dental & Lab Direct Flow Reverse Osmosis System

Osmio HT+ Dental & Lab Direct Flow Reverse Osmosis System

The Osmio HT+ Dental & Lab Direct Flow Reverse Osmosis System is a clean and modern, leading technology Direct Flow (No tank) reverse osmosis system that will ensure your decon room operation is more sanitary, water is on demand, and much easier maintenance. A major benefit of Direct Flow Reverse Osmosis versus conventional tank-based reverse osmosis, is the huge level of water saved by Direct Flow, not to mention there is no need to sanitise the tank. Bacteria build up of tanks is a primary reason why many dental surgeries end up getting poor membrane performance, due to bacteria build up and membrane fouling, and end up using more DI resin as this is doing more heavy lifting because of poor membrane performance.

The Osmio HT+ Dental & Lab Direct Flow Reverse Osmosis System uses 400 GPD Direct Flow Reverse Osmosis Membrane to provide a freshly purified on demand flow (approximately 1LPM at 3 bar incoming pressure).

✓ Ideal for autoclaves / sterilisers. Remove up to 99.99% of impurities from UK mains water.

✓ Under the counter commercial system that generates Deionized Water.

✓ Total of 5 filters, hygienically packaged. Meets HTM requirements and can deliver 0-3ppm, which is distilled quality.

✓ Smart Water - Analyzes water, tracks filter lifetime and optimizes system performance.

✓ Saves over 30,000 litres per year of water, a huge saving for any Dental Practice, Laboratory or School.

✓ Small footprint / Easy installation, standing model - no mounting to walls required.

✓ 6 month filter lifetime (first four filters) / deionized filter lifetime variable

✓ Full, courteous support provided by experienced professionals.

The perfect solution for Dental Practices - comes complete with tank, tap and fitting kit

The Osmio HT+ Dental & Lab Direct Flow Reverse Osmosis System is a digitally controlled reverse osmosis system with Smart Water capability that is specifically designed for dental and medical applications where deionized water is required. The system incorporates high quality filters, easy Plug & Play components and a digital controller which tracks filter lifetime as well as measure instantaneous water purity.

After the reverse osmosis process, the HT+ is equipped with a mixed bed filter which purifies the water down to deionized levels. The mixed bed filter will change colour when it is time to change it, additionally, the digital controller can be set to cut water when filter lifetime is achieved in order to not damage the autoclave sterilisers.

The system also comes equipped with a digital controller with Smart Water capabilities. HT+ continuously analyses the purified water and displays the results on screen. The system will know when water is consumed and immediately reverse flush the membrane filters afterwards to protect water quality. The Smart Water System does many things in the background such as track water temperature, errors and filter lifetime in order to give the highest up-time possible while delivering the best experience. With the push of a button or by looking at the bar graph on the display, the user will know exactly how many days are left until the next filter change. The system will also create a sound alarm when it is time to change the filters and even cut the water flow if it is surpassed significantly.

The Osmio HT+ DI is specifically designed to generate DI water for many applications including pharmaceutical, detergent, dental and medical.