3 way tap with spray
The image below shows the taller version of the Osmio Azzurra 3 Way Tap with Spray Hose, standing at 565mm, 90mm taller than the Osmio Azzurra Breve 3 Way Triflow Tap with Spray Hose, which stands at 475mm:
As a smaller version of the Osmio Azzurra, the Osmio Azzurra Breve is a very high quality 3 Way Triflow Kitchen Mixer Tap with a pull-out Spray Hose with dual spray settings. It makes the ideal solution for a 3 in 1 kitchen mixer tap by combining elegant design and superb functionality. The Osmio Azzurra Breve would be a welcome addition to a top quality home or workplace kitchen and uses separate water paths to ensure that the filtered water pathway is not mixed with any unfiltered water.
The filtered water is dispensed via the horizontal spout, which has a smooth swivel action to be positioned as required. The build quality of the Osmio Azzurra Breve 3 Way Triflow Tap is second to none with a very heavy solid brass construction with a durable chrome highly polished surface.
The swan-necked pull out spray hose has a dual control feature for different spray variations and is controlled with via the ceramic cartridge lever, a mark of long-lasting great quality.
The full kit comes complete with flexible hoses and fitting parts. We offer a wide range of very high quality water filter systems you can purchase along with this stunningly elegant, modern and top quality 3 way triflow kitchen mixer tap with spray hose.
How the Tap Handles Work
The diagram below shows how the tap handles work. The right hand lever pushes out and moves away from you for hot water and towards you for cold water and anywhere between mixes hot and cold. The left hand lever will move towards you and provide the filtered water - or if you are using a water softener and your cold and hot side is softened, you can have this side providing the hard water for drinking, which can be filtered or not as you prefer.
Dimensions & Technical Drawing
Supplied with fixing accessories and 3 flexible hoses (3/8" or 1/2").
✔ Granular Activated Carbon (GAC) – for chlorine, taste and odour reduction
✔ Phosphate – for scale inhibition
✔ De-alk resin – for temporary hardness and heavy metal reduction
The Watts 2.5 x 10 GAC/Phosphate & De-Alk Filter incorporates granular activated carbon (GAC) which is combined with Phosphate and De-alk resin. The filter is effective against chlorine, taste and odour, heavy metals e.g. lead, and will also tackle hard water, which is seen as limescale in kettles and as an unsightly scum on the surface of hot drinks. Water hardness varies greatly depending upon location, so the filter will need to be replaced at 3 - 6 monthly intervals or longer all of which entirely depends on the hardness of your water and the amount you use.
We recommend your flow rate not exceed 4 LPM for the best contact time and filtration.
||Osmio Azzurra Breve 3-Way Tap Ultra-Soft Filter Kit
Separate internal water paths so filtered water does not mix with hot and cold
Dual control swan neck professional spout for mixed water only
Quarter turn ceramic valve for filtered
Ceramic cartridge for mixed water
Horizontal spout for filtered water
Complete with flexible hoses and NRV's
Weight - 5kg
Height - 475mm
Tap base hole size: 35 mm
Water Pressure & Flow Chart
This tap will produce the following flow rates according to the incoming pressure on both hot and cold:
0.5 bar - 0.4L/M / 0.5 bar - 0.4L/M
1.0 bar - 1.6L/M / 1.0 bar - 1.4L/M
1.5 bar - 3.6L/M / 1.5 bar - 3.4L/M
2.0 bar - 5.6L/M / 2.0 bar - 5.6L/M
2.5 bar - 7.6L/M / 2.5 bar - 6.8L/M
Boxed Weight & Dimensions:
Weight: 4.69 kg
Length: 60 cm
Width: 38 cm
Height: 8 cm
It is therefore recommended that this tap only be used on a pressurized hot water system. It may be used on a gravity fed hot water system provided the incoming pressure produces a flow rate that is acceptable to you, or if the gravity fed hot water system is pumped and pressurized.