NanoCeram® 0.2 Micron Pleated Filter 2.5 x 10 Inch

In Stock
SKU: P2.5-10
 Back to: 2.5 x 10 Inch Water Filter Cartridges

Due to their unique construction, the NanoCeram® 0.2 Micron Pleated Filter (2.5 x 10 Inch), with their very high surface area offer:

  • Very high flow rates
  • Very low pressure loss
  • Very high dirt holding capacity
  • 5 log reduction for cysts
  • 5 log reduction for pathogenic bacteria”

Each NanoCeram® pleated filter cartridge is designed to satisfy the most difficult requirements in water treatment. By using the scientific principal of electropositive attraction/capture, NanoCeram® technology leads to a rapid and highly efficient adsorption of virtually all particle sizes.

NanoCeram®’s media has a high capacity for particles as large astens of microns or as small as a few nanometers. Each NanoCeram® Filter Cartridge exhibits a rating of 0.2μ . . . a rating typically associated with ultraporous membranes. Yet NanoCeram® flow rates are hundreds of times greater than such membranes.

Additional Information

Model NanoCeram® 0.2 Micron Pleated Filter 2.5 x 10 Inch
SKU NanoCeram® 0.2 Micron Pleated Filter 2.5 x 10 Inch
Brand Watts
In Depth Pre-filtration: Required
Housing Size Required: 2.5" x 10"
Cartridge Size: 2.5" x 9.75"
Capacity: 20,000 litres
Material: Nanofibre
Pressure: 75-100 psi
Life Span: Average 12 months
Max Flow: 100 Litres p/m
Water pH: 4.5 to 9.0
Water Temp: 4-470 Celsius
Dry Weight: 0.5 Kg
Principal applications: POE (point of entry, residential use)

Thermally bonded blend of micro-glass fibres & cellulose infused with nano-alumina fibres in a non-woven matrix creates an electro-positively charged depth filter media. When assembled into a pleated cartridge, NanoCeram® offers a unique combination of efficiency, capacity, flow rate & low pressure drop at levels unmatched in today’s filtration marketplace.

• Silt Density Index (SDI): ≤ 0.5
• Turbidity Reduction: < 0.01 NTU until Terminal ΔP (40psi)
• Low ΔP: < 1.5psi @ 4gpm (Part No. P2.5-10)
• Efficiency: 99.9% reduction of 0.2μ particulate (monodispersed latex spheres)
• Flow Rate: 5mL/cm2/min @ 4gpm (Part No. P2.5-10)
• Dirt Holding Capacity (DHC): 572 mg/in2 (A2 Fine Test Dust)
• Cyst Retention: > 5 LRV
• Bacteria (Klebsiella terrigena): > 5 LRV
• Temperature Range: 39 - 135° F (4 - 57°C)
• Maximum Pressure: 70 psi (4.83 bar)
• Effective pH Range: 5 - 10