✔ Makes all the cold water at your kitchen sink filtered
If you are looking for the perfect simple, cost effective, efficient and high performance reliable NSF Certified quality water filtration housing and filter solution without the need for a separate tap or a 3 way tap or a self-piercing saddle valve and any other installation parts, then this is the perfect kit for you!
This Fluoride Cartridge uses fine white granular media designed to reduce or completely remove fluoride levels. This cartridge is perfect for those who are concerned about their levels of fluoride intake and want to reduce this from tap water.
Unfortunately we cannot say precisely what percentage is removed from your water as the removal efficiency will depend on temperature, pH, water quality, flow rate, and concentration of suspended solids. However, the cartridge has an absorption capacity of 10 mg fluoride/g or 500mg/l so under optimal conditions (where the UK limit is 1.5 mg/l) may be fully effective at removing all the fluoride compounds.
We would recommend the cartridge should be changed every 6-12 months (or 5000 gallons) whichever comes first.
The Watts Flowmatic filter housings with buttress threads for 9-3/4 in. filter cartridges are made from NSF and FDA grade materials, manufactured from the highest quality, FDA grade, 100% polypropylene and acrylic styrene. They have a leak-proof sealing is accomplished by compression against a top seated EPDM o-ring located in the housing’s sump. Thick wall and added ribs make the housings ideal for a wide range of applications. Polypropylene construction provides excellent chemical resistance with most acids, alcohol, ammonia, oils, plating solutions and many aggressive chemicals.
The Watts EZFITPRO-100 Inline 15mm push fit water filter system has the following dimensions:
Height (including bracket): 340mm
Width (at widest part): 115mm
Depth (at widest part): 115mm
|Model||EASY-FIT Fluoride Reduction Filter System|
Housing is rated for temperatures to 125°F (52°C) and pressures to 125 psid (8.75 bar).
The Full Kit contains the following:
1 x Watts NSF Certified Housing
2 x 15mm Push Fitting Adaptors
1 x Spanner
1 x Bracket with 4 Mounting Screws
1 x Fluoride Filter