Rainwater filter for installation in rainwater tanks and also in the ground before the tank. Two step cleaning system, therefore high level of filtering efficiency, independent of flow rate.
Due to the steep inclination of the filter cartridge the dirt is continuously cleaned away into the sewer. Frost resistant.
Self cleaning. Low maintenance intervals, filter insert is easily removed for cleaning and does not have to be changed.
Optional dirt retention basket can be supplied.
Connection capacity according to DIN 1986 for roof areas up to 350 m².
Max. Flow Rate Sieve insert 1,5 l/sec = 5,4 m³ cleaned water per hour.
Height difference between inlet and outlet just 300 mm.
The cleaned water can be used in washing machines, toilet flushing and garden watering, in homes, in commerce, in public buildings and in industry.
The filter has to be cleaned depending on the contamination 1 - 2 times during the year.
1. As water arrives the level builds up and is equally distributed across the cascade.
2. Pre cleaning through the cascades. Largest dirt particles are led across the primary filter cascades directly to the sewer.
3. Pre filtered water then flows over the secondary filter sieve (mesh size 0,65 mm). Due to the special mesh structure of the sieve, any dirt washes directly into the sewer which means the filter is self cleaning, with very low maintenance.
4. Cleaned water flows to the cistern.
5. Dirt goes to the sewer.
|Model||1000500 - DN100|
|In Depth||Code: DN100 - 1000595
Filter according to DIN 1989-2, Typ C
Connection inlet: 2 x DN 100
Outlet into tank: DN 100
Outlet into sewer: DN 125
Height difference between rainwater inlet and outlet 300 mm.
Housing material: Polyethylen
Filter cartridge: Stainless steel 1.4301
Mesh size: 0,65 mm
Material Cascade insert: Polyethylen
Weight: 6,2 kg