Call us: 020 3290 9960

osmio_indra_pro-300_water_filter_system_undersink_1

Osmio INDRA-PRO 300 Undersink Filter Kit (No Tap)

SKU:INDRAFK3-PRO
The Osmio INDRA-PRO 300 Undersink Water Filter Kit is the top of the range inline filter system from Osmio Water and the perfect water filter system for those looking to improve the taste of water by reducing a whole range of bacteria, viruses and pharmaceuticals.
£162.00
Product out of stock
Manufacturer : Osmio Water

Description

Osmio EZFITPRO-300 Water Filter System

This is the best inline water filter system from Osmio Water.

Comes complete with fitting kit, high quality dual housing made in Italy, two high performing filters for Chemicals, Heavy Metals, Bacteria and Limescale.

There are two filters in the system, which both serve a different purpose with the ultimate result being purified, clean, healthy and great tasting water for all your drinking, cooking, washing and cleaning needs.

Filter 1: Coldstream CF108W Ceramic Water Filter Cartridge 2.9" x 9.75" OBE - changed every 6-12 month

✓ Made in the UK by world leading manufacturer

✓ >99.9999% removal of bacteria and cysts

✓ Long lasting and easily changed

The Coldstream CF108W is a high performing ceramic cartridge which is capable of fluoride removal as well as chlorine, heavy metals and bacteria and cysts, making it the most powerful ceramic cartridge currently on the market. This filter can be a direct replacement for any 2.5 x 10 Inch cartridge and comes with rubber washer rings to ensure it will fit any housing.

For a good flow rate we recommend a minimum incoming pressure of at least 3 bar unless you are using it on a separate tap in which case 2 bar minimum is fine.

Operating performance

Working Pressure (for pressure use)
Minimum 10 Psi Maximum 125 Psi

Working parameters
Working temperature range 5 - 30oC Working ph range 5.5 - 9.5
Suitable for gravity filters No
Recommended change frequency 6 months
Nominal Flow rate** To achieve maximum performance Litres / minute 2.84 US gallons / minute 0.75
Capacity Before replacement to guarantee performance Litres 3000 US gallons 792
Contaminant Removal Pathogenic Organisms % Bacteria Removal Rate E.Coli / Cholera / Shigella / Typhoid / Klebsiella Terrigena 99.9999% % Cyst Removal Cryptosporidium / Giardia 99.9999%
Trace Organics Removal*** Volatile Organic Contaminants 99.90% Lead removal 93.20% Heavy Metal Contaminants 99.90% Pesticide Contaminants 99.90% Herbicide Contaminants 99.90% Excluding Lead , Nickel and Zinc
Inorganics Removal Free Chlorine Removal @ 2 ppb presence* 99.90% Chloramine Removal @ 3 ppb presence* 99.90% Fluoride Removal @ 8 ppb presence* 25.00%
Size length 9.75" Diameter 2.9" Fitting OBE Fitting Length N/A
** (defined mean flow, Typical range +25% -20%) *** Product tested by Envirotech Laboratories inc to NSF53 standard a Antimony, Arsenic, Beryllium, Bismuth, Chromium, Mercury,Selenium

Filter 2: The Osmio Limescale & Chlorine Filter - changed every 3-6 months (dependent on hardness)

✔ Granular Activated Carbon (GAC) – for chlorine, taste and odour reduction

✔ De-alk resin – for temporary hardness and heavy metal reduction

The Osmio 2.5 x 10 Limescale & Chlorine Filter Filter incorporates granular activated carbon (GAC) which is combined with Phosphate and De-alk resin. The filter is effective against chlorine, taste and odour, heavy metals e.g. lead, and will also tackle hard water, which is seen as limescale in kettles and as an unsightly scum on the surface of hot drinks. Water hardness varies greatly depending upon location, so the filter will need to be replaced at 3 - 6 monthly intervals or longer all of which entirely depends on the hardness of your water and the amount you use

Recycling and disposing of these filters

The Ceramic Water Filter will need to be smashed with the media inside thrown into the bin. The plastic ends can then be placed within the recycling.

The Limescale & Chlorine Filter will need to have the Granular Activated Carbon within the filter to be emptied out and used for soil drainage and compost. Plastic components from the filter can then be placed in recycling.

System Dimensions

The system will easily fit under your kitchen sink. See the dimensions shown below:

Osmio INDRA-PRO 300 Water Filter System

Osmio INDRA-PRO 300 Undersink Filter Kit & Tap - what is included?

The kit includes everything you need to get the system up and running and is easy to install.

The full kit includes:

1 off 10" Dual Housing with 1/2" BSP Brass Female Ports

1 off Coldstream CF108W Ceramic Water Filter Cartridge 2.9" x 9.75" (filter 1)

1 off Osmio Limescale & Chlorine FIlter (filter 2)

1 off 1/2" (male-female) Feed In Valve with 1/4" Adaptor

2 off 1/2" Male to 1/4" Push Fit

2 metres of 1/4" Tubing

Download the Osmio INDRA Water Filter System Installation Guide

Download Osmio Indra Water Filter Installation Manual

Disposing of used filters

Coldstream filter: The filter would need to be smashed the ceramic and media inside should go to rubbish and the plastic ends can be recycled as plastic. Some people use the media and ceramic to compost but I don't because they can have pharmaceutical and hormone traces and I grow food so I would not want that. For the media, it would be best to send that stuff to the landfill.

Osmio Chlorine and Limescale Filter: Unscrew the cap end(s) and empty out the media into normal rubbish. The plastic parts can be put in recycling so long as your council accepts plastics recycling, or if not then at a council recycling place along with the plastic parts from the Coldstream filter.

Copyright © 2013-2017 - Webshop Central Ltd. All rights reserved.
Registered office: 171 Kingston Road, Teddington, England, TW11 9JP
Registered Company No. 8503874
VAT number: 252 6182 14