Suitable for any 2.5 x 10 Inch standard size filter housing
PYROLOX High Purity, high capacity filtration media for hydrogen sulfide, iron and manganese removal. PYROLOX works on the principle of a catalyst reaction, bur itself remains relatively unchanged. This reaction is accompanied with the formation of intermediate compound or compounds, such as higher oxides of manganese, so that by the alternate composition and decomposition of them on the PYROLOX is left unchanged.
PYROLOX works on a principle whereby the hydrogen sulfide, iron and manganese are actually oxidized on the media and simple backwashing cleans the bed. No chemical regeneration is required, nothing is impaired into the drinking water and essentially unlimited capacity for low containment concentrations.
PYROLOX works equally well on three main classes of water. Those waters which begin to precipitate hydrogen sulfide, iron and manganese on exposure to air, usually hard water containing carbonate or sulphates, or both.
Those waters which will hold hydrogen sulfide, iron and manganese in solution indefinitely, even when chlorinated and/or aerated. The elements usually combine with organic acids and appear in the colloidal form.
Those waters which contain hydrogen sulfide, iron and manganese, or all, in each above forms and therefore deposit a part, but not all, of the element after aeration, chlorination or ozone, and cannot be removed entirely by simple filtration.
PYROLOX has also proven to be an excellent compliment to aeration, chlorination and ozone. PYROLOX acts not only as a turbidity filter, but also as a polishing filter for any breakthrough of hydrogen sulfur, iron or manganese with the use of aeration, chlorination, ozone or other pretreatment methods.
|Model||2.5 x 10 Inch Pyrolox Filter Media Cartridge|
|In Depth||Maximum recommended flow rate: 3.75 LPM
Expected life: Approximately 4 months at 200mg/L Iron levels